The Purus Marketing Department have designed advertising artwork for the launch of our brand new product, the 59mm S-Series super low-level floor gully. The full page and half page adverts will be published in a number of magazines across the country in the upcoming weeks.
Our 59mm Minimax S-Series floor gully is suitable for both vinyl and tiled floor finishes. Due to a change in screed depth requirements across the construction industry, we have taken the same successful technology as our Minimax 50 and made the gully even shallower. With a total height of just 59mm allowing it to fit into shallow concrete slabs, the 59mm S-Series gully includes Purus’ combined water and mechanical NOOD trap which was used in the London 2012 Athletes Village.
With careful planning from the architect, the contractor no longer has to install a vertical outlet floor gully through the slab. At just 59mm, the brand new S-Series floor gully makes it possible for this problematic situation to now be avoided. The 59mm S-Series gully incorporates the same NOOD water trap technology as Purus’ other floor gullies, so all of the benefits that you are used to with Purus are all still in place; and it also introduces a brand new stainless steel clamping ring designed for screwing either vinyl or waterproof membrane for tiles down into the floor gully. The NOOD combined water and mechanical trap uses a spring mechanism to prevent any foul air from escaping through the gully even when it dries out and it is extremely simple to clean and maintain.
A range of stainless steel grate options are available for the 59mm S-Series floor gully – you can view all of the options here. The Drop grate for vinyl floors has a 150mm diameter and slots into the gully above the vinyl flooring once clamped into place; and our 200x200mm PK200 grates are also available in a selection of patterns for tiled floors.